Black Quickserve Tap with Back Nut - For Use with Fermentation Vessel

Black Quickserve Tap with Back Nut - For Use with Fermentation Vessel or Pressure Barrel

Code: 206082

In stock

Black Quickserve Tap with Back Nut - For Use with Fermentation Vessel or Pressure Barrel

New to brewing?

What our customers say

“Excellent customer service. I emailed after placing the order to ask if it could be despatched ASAP and within minutes received an email saying it had been packed and was ready to go. Arrived really quickly. Brilliant.”

Jackie Perry

“Great, as described, reasonably priced, arrived really quickly, thank you.”

Rachel Moulstone

Black Quickserve Tap with Back Nut - For Use with Fermentation Vessel or Pressure Barrel

Code: 206082

In stock

Was £7.79

£7.59

Offer: Save £0.20

Order by 2:30pm for same day dispatch on weekdays

Quantity

These black Quickserve taps fit our 25 litre and 33 litre fermentation vessels and our 5 gallon pressure barrels and King Kegs and are supplied with a back nut. They require a 26-27mm hole (26mm is quite tight, 27mm is fine, but please do not make the hole any bigger than this). 180 degrees from full closed to fully open. When fitting, please smear a little petroleum jelly (e.g. Vaseline) around the seal.

Flow rate: 203 ml/s (for water at a constant 25 cm. head height)